MILTON — Construction has begun on a 14-lot subdivision off Sweeny Farm Road, just across Route 7 from Bove’s and 802 Auto Sales.
According to recent Act 250 filings, each of the 14 homes will have four bedrooms and be built within the cleared portion of the property, avoiding the steeper, less suitable terrain farther east.
At its July 7 meeting, the Milton Selectboard unanimously approved a $619,563 public infrastructure cost estimate for the project, known as Hillside Meadows. Plans include for the town to extend Sweeny Farm Road into a loop and add a sidewalk, municipal water lines and four fire hydrants.
Milton zoning administrator Amanda Pitts told the board the project, proposed by Rivers Edge Building Development LLC, received final approval from the Development Review Board.
The homes will be clustered on a 51-acre parcel at 13 Sweeny Farm Road, with much of the surrounding land— including wetlands and wooded areas—preserved as open space.
The project is also subject to Vermont’s Act 250 review process, which evaluates environmental and community impacts of large developments. Given the proximity to wetlands and Allen Brook, stormwater management and erosion control will be key factors during construction.
Municipal water will serve the homes, while private septic systems will handle wastewater. The road will be widened to 24 feet and include a sidewalk on one side. Fire safety plans were updated at the request of the Milton Fire Department to include the four hydrants, two more than initially proposed.
The DRB approval came with 18 conditions, including permit requirements, stormwater protections and legal agreements for shared infrastructure. A $500 legal escrow was also required for deed and easement review.
The subdivision follows Milton’s Comprehensive Plan, which supports clustered residential growth in the Catamount Planning Area of Route 7 while protecting natural resources.
Once complete, Hillside Meadows will increase the number of homes accessed by Sweeny Farm Road from six to 20.
Comments
No comments on this item Please log in to comment by clicking here